Noctua NF-A14 PWM Chromax Premium Grade Fan - 140mm

The NF-A14 Chromax.Black.Swap is a silent 140 mm premium fan with round AAO (Advanced Acoustic Optimization) frame and 140 mm mounting holes (105 mm hole spacing). For an even higher cooling performance on current high-end CPU coolers, the width was expanded to 150 mm and supplemented by advanced aerodynamic design measures such as flow acceleration channels, which again improve the silent performance. The NF-A14 Chromax.Black.Swap achieves a high static pressure as well as an optimum ratio of the flow rate and the noise generated by extensive aerodynamic optimization.

The impeller of the NF-A14 Chromax.Black.Swap is equipped with flow acceleration channels on the suction side. By accelerating the air flow in the critical outer regions of the fan blades, suction-side vortex detachments are reduced, resulting in higher efficiency and lower turbulence-induced noise emission.

Minimal noise

Noctuas AAO (Advaced Acoustic Optimization) frames have built-in vibration buffers, a stepped inlet design, and an inner surface microstructure that allows even better performance / noise efficiency.

Advanced colour selection

The anti-vibration pads made from extra-soft silicone reduce the transmission of minimal vibrations and are compatible with all standard screws as well as standard mounting systems or fan brackets used with CPU coolers. With the NF-A14 Chromax.Black.Swap, the decoupling corners can be used in several colors. The fans are available in black, white, yellow, green, red and blue.

In addition, the NF-A14 Chromax.Black.Swap is equipped with the further optimized second generation Noctua's proven SSO bearing system. With SSO2, the back magnet is closer to the fan axis, resulting in even better stabilization resulting in further improved precision and durability.

Noctuas fans are known for their makellose quality and outstanding longevity. Like all Noctua fans, the NF-A14 Chromax.Black.Swap has an MTBF specification of over 150,000 hours and is delivered with a full six-year manufacturing warranty.

Technical details:

Dimensions: 140 x 150 x 25 mm (W x H x D)

Material: Plastic

Normal mode: 1500 rpm (minimum 300 over PWM), 24.6 dB (A), 140.2 m³ / h

Power: 12V

Power consumption: 1.56 W, 0.13 A

Connection: 4-pin PWM

Life expectancy: 150,000 h

Manufacturing guarantee: 6 years

Accessories:

30 cm cable extension

4x fan screws

48x vibration inhibitor