Kolink Inspire K7 ARGB Midi Tower Black

From the popular 'Inspire' range comes the next entry into the series - The K7 ARGB Midi-Tower. With an attractive front panel design featuring an angled ARGB strip, carbon fiber effect finish and mesh ventilation, the Inspire K7 ARGB Midi-Tower is another excellent addition to the price/performance sector. Kolink Inspire K7: Covering all bases The Kolink Inspire K7 features an angled front ARGB strip, along with a rear 120mm ARGB fan, controlled by the I/O panel RGB button or via connection to your motherboards 3-Pin 5VDG connector and using the applicable software. The front panel also features both a carbon fiber effect finish, alongside vented air inlets for good airflow. Users are also free to install up to a 280 mm radiator in the front. Aside from the pre-installed fan, users are also free to install three 120mm fans on the front panel, plus two more 120mm fans in the roof. A full tempered glass side panel shows off your system build in style. The Kolink Inspire K7: Ready for your hardware The interior comes entirely in black, with a PSU shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDD's, using a 'drop and lock' system to secure. Alternatively, 2.5" SSD's can be installed here, or directly on top of the PSU shroud. The motherboard tray and PSU shroud both offer numerous openings for optimum cable management, with up to 30mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 180mm. Graphics cards can be up to 33.5cm long (31cm if mounting a front AIO) and CPU coolers up to 16 cm tall. Additionally, the I/O panel located at the front possesses two USB 2.0 ports as well as a USB 3.0 Type-A port.