Lian Li UNI FAN AL V2 Computer case, Processor 12 cm Black 1 pc(s)

UPGRADED MODULARITY
UNI FAN AL V2 features an interlocking system to connect up to 6 fans in two clusters to a single controller port, making fans installation and cable management a simple job.

SINGLE CABLE TO CONTROLLER
Combo of power and LED cable, reduce cable numbers.

EXTENSION CABLE
Bridge 2 fan cluster, keep as minor cable as possible.

PLUG-IN POWER CABLE MODULE
Flush fan frame, reduce clearance issues.

SLIDE-IN MECHANISM
Pin-to-pad contact, daisy-chain the fan clusters simply.

REMOVABLE KEY
Remove the interlocking key to improving compatibility.

THICKER YET EASY TO INSTALL
The UNI FAN AL120 V2 has been amended to a slightly thicker frame of 28mm, and implements indented screw holes to fit standard 25mm long screws for installation.

ULTIMATE PERFORMANCE ARGB FAN
Running at peak performance while keeping low noise levels, the UNI FAN AL120 V2 is the best-performing ARGB fan within the entire UNI FAN lineup.

THICKER IMPELLER
Increased thickness to 28mm for better efficiency

MAGNETIC FRAME
To provide extra support for fan blades

FLUID DYNAMIC BEARING (FDB)
To effectively reduce the internal friction for improved durability

CIRCLIP
To secure the fan blades in place

EXTRA MAGNETIC FORCE
To support the fan blades and reduce vibration levels, thus ensuring low noise levels while in operation

STATOR
To provide a rotating magnetic field that generates momentum

RUBBER PADS
To reduce vibrations and ensure extremely low noise levels

DAZZLING FROM ALL ANGLES
UNI FAN ALV2 has comprehensive lighting all around with independent control of the effects at the fan blades and fan frame, and combined lighting effects.

Sophisticated lighting on the fan blade glows the whole system.
The fine LED strips at the four corners of the fan frame and beside the aluminum sides can be set in different colors, creating an elegant look.
A ring of RGB is visible at the rear side, keeping it attractive no matter as intake or exhaust.

MORE LIGHTING EFFECT CHOICES
New lighting effects have been developed for the updated version of the AL fans, offering more lighting options.

CONTINUOUS LIGHTING EFFECTS
A merge function is available to allow lighting effects to flow not only across a single cluster but across the whole system.

SIMPLE CONNECTION
2 ways to connect UNI FAN ALV2 fans, adapted to your personal needs.


UNI HUB - 16 Fans in One Go
The included controller in the triple pack (also available separately) can support up to 16 fans and 2 SM-type connected devices to simplify cable management and provide efficient power to the fans.

SM TYPE PORT
Compatible with the Galahad AIO pump ARGB cable…etc. Each port supports a 5W maximum output.

SYNC 4 port replicates the lighting effect applied to port 4 and SYNC 2 port replicates the lighting effect applied to port 2

FAN GROUP ARGB + PWM SIGNAL
Support one cluster of up to 6 fans

USB CABLE
Plug into a motherboard 9-pin USB header.

5V ARGB / 4 PIN PWM CABLE
Required for motherboard sync function.

2×SATA CABLE
For a total maximum input of 29W

DIRECT TO MOTHERBOARD
The single pack includes a cable module that features a 4-PIN PWM and a 3-PIN SM-type ARGB cable (3P to 3P 5V ARGB cable is included) to connect directly to the motherboard.