Endgame Gear OP1 Alt Switch Set - Huano 80m 55-60gf

Replacement Switches

The Endgame Gear OP1 Switch Pack has been designed to replace the standard mechanical switches on the Endgame Gear OP1 gaming mouse. Each pack contains two enthusiast-grades, with an actuation force and click feel to suit your gaming style. Switches with an actuation range wider than 10gf have been pre-sorted and paired two models within a 5gf range. This ensures a more consistent click for you.

Each switch comes pre-installed and soldered to PCBs, to ensure simple and quick installation.

To install the Endgame Gear OP1 Switch Pack, follow these simple steps:

1, Unscrew the two bottom screws on the underside of your OP1 gaming mouse

2. Carefully open the back

3. Remove the main button switch cables

4. Hold the shell to the left and use a PH000 screwdriver (not included) to undo the PCB screws

5. Remove the original switches and add the new pair to the top shell

6. Use the PH000 to screw the new PCB into place

7. Plug the main button switch cables back in

8. Replace the back shell and secure in place with the screws

Huano 80m 55-60gf Switches

There are eight Endgame Gear OP1 Switch Packs available. This pack features Huano 80m 55-60gf switches. These come in a stylish transparent blue shell and offer a swift, tactile experience. If you’re after a satisfying click, these switches are for you.

Compatibility

The Endgame Gear OP1 Switch Pack is currently compatible with the following gaming mice:

Compatibility with the OP1we Series is currently not supported.